DESCRIPTIONS
BSW Sewage-PC Flow Meters : Analog/Mechanical Flow Meter for Water or Waste/Sewage Water is an epoxy coated cast iron with plastic cap, it has great flow rate measure and resistant to light chemicals and corrosion. An economic version of SHM Sewage Flow Meters, for indoor used, sharing the same specification plus one advantages : value.
APPLICATION
BSW Sewage-PC Flow Meters can be used for :
- Sewage Treatment Plant (STP) ie. Hospital, HOtel, Industrial, Mall, Residential, Palm Oil, etc.
- Raw water, sludge water and many others
- Inlet and Outlet water treatment
- Best suited for pump system and high flow rate
FEATURES
- Easy Installation and maintenance
- Dry dial, magnetic drive
- High Bypass and Very Low Head Loss
- Plastic Vacuum Sealed Register, Free from condensation and remain clear for long term.
- Working temperature 0.1-50°C for cold water and 0.1-90°C for hot water
- Max.pressure : 16 bar.Max.Error : +/-2%
- Protection Grade : IP 68
- ISO 9001 and ISO 4064
- Warranty 2 years (Full service and spare part)
TECHNICAL SPECIFICATIONS
| SIZE | Maximum Flow (Qmax) | Continues Flow (QN) | Transitional Flow (QT) | Minimum Flow (Qmin) | Length (L) | High (H) | Connection Flange | Weight | |||
| DN | INCH | MM | Outside Diameter (D1) | Bolt Inner Diameter D2) | |||||||
| DN 50 | 2″ | 50 | 30 | 15 | 3 | 200 | 272 | 165 | 125 | 12 | |
| DN 65 | 2.5″ | 65 | 50 | 25 | 5 | 200 | 274 | 185 | 145 | 15 | |
| DN 80 | 3″ | 80 | 80 | 40 | 8 | 225 | 281 | 200 | 160 | 16 | |
| DN 100 | 4″ | 100 | 120 | 60 | 12 | 250 | 291 | 220 | 180 | 18 | |
| DN 125 | 5″ | 125 | 200 | 100 | 20 | 250 | 312 | 250 | 210 | 22 | |
| DN 150 | 6″ | 150 | 300 | 150 | 30 | 300 | 341 | 285 | 240 | 32 | |
| DN 200 | 8″ | 200 | 500 | 250 | 50 | 350 | 384 | 340 | 295 | 40 | |
| DN 250 | 10″ | 250 | 800 | 400 | 80 | 450 | 435 | 405 | 350 | 68 | |
| DN 300 | 12″ | 300 | 1200 | 600 | 120 | 500 | 486 | 445 | 400 | 90 | |
