Address : Jln. Hayam Wuruk

Gedung Harco Glodok Lantai 5 Blok A No. 42

Jakarta Barat

Electromagnetic Flowmeter ALIA AMC2100E Series

Detail Product :

The Aliamag AMC2100E series converter is a microprocessor based intelligent transmitter that can be paired with any of the Alia AMF series sensors. The unit features multiple display parameters including flow rate, flow total, diagnostics, programming and troubleshooting.

AMC2100E series converter with temperature / energy.
  • Four line LCD display Flow Rate / Energy / Totalizer
  • Accuracy of +/-0.4% of reading
  • Bi-directional flow measurement, current and pulse output
  • Large digital display, with temperature / energy function
  • 99 times records for power on / off
  • MODBUS/HART communication

Spesification Product :

Excitation: Keyboard:
DC pulsed 4 external keys for programming 
Display: and display control
4 lines LCD with back light Low Flow Cutoff:
Line 1 0 to 9.9 %
Date and Time Data logger Function:
Line 2 99times flowrate records for power on/off
6 digit flowrate Record Data:
7 digit energy value Date/Time when power on/off
Fault code 99 years flow rate / energy /
Supply temperature temperature / total flow / total energy
Line 3 One record data per Hour
9 digit totalizer for forward / reverse flow Damping:
9 digit totalizer for heat / cold  energy 0.1 to 99.9 seconds
Fault code content Self Diagnosis:
Return temperature The following error message are
Line 4 displayed if failure occurs
Differential temperature – Coil failure
Unit – Power failure
L/S, L/M, L/H, M3/S, M3/m, M3/H, ML/H, ML/m – Overanged Output 
ML/S, KW, MW, KJ/H, MJ/H, GJ/H, Mcal/H
Kcal/H, Cal/H
– Internal error
Measuring Range: – Overflow
Min.  0 to 0.15 m/s – Empty pipe
Max. 0 to 15 m/s Cable Entry:
Accuracy: Standard :PG11 Option:1/2″NPTF
+/-0.4% of reading (Velocity >=0.5 m/s) Protection Class:
+/-0.002 m/s (Velocity < 0.5 m/s) IP 65
Repeatability: Ambient Temperature:
+/-0.1% of reading
-25 to +65 oC
Current Output: Material:
4-20 mA (Isolated) Aluminum Alloy
Load Temperature Input:
Max. 600  PT1000W, 2 wire 
Pulse output: Power Supply:
Open collector 90-260 VAC, 50/60 Hz
Rating 24 VDC +/- 10% (Option)
3 to 30 VDC, 20 mA Max.  Power Consumption:
Pulse Rate: 3-17 W (Dependent on sensor size)
1)Scale pulse (Pusle/M3, Pulse/L, Other) Weight:
2)Frequency: 0-5000 Hz 1.4 Kg
Communication: Mounting:
RS 485 (MODBUS Protocol) Wall mounting
HART signal (Compatible) Bracket on 2″ pipe
Data Storage:
Operation parameters and totalizer 
figures are stored by EEPROM for more
than 10 years


Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *


error: Content is protected !!