Flodis ITRON DN20 Single Jet Turbine Type Meter, Designed To Measure Cold Drinking Water, Offering The Capability To Measure Accurately A Wide Range Of Flow Rates.
Flodis Has One Of The Simplest But Highly Engineered Design, That Enables To Measure Accurately Over Time From Very Low Flow Rates Up To Peak Flows, Even In Severe Environmental Conditions When In Service.
Reliability-Durability
- Proven Stable Accuracy In Tough Installation Conditions And High Turbidity Water. Flodis Has Been In Service For Our Main Customers For Over 10 Years Now.
- Millions Of Flodis Are Currently In Service Around The World In Many Different Climate Conditions, Always Offering One Of The Best Return Of Investment Over Time.
- The High Quality Of Pivoting And Levitation Of The Balanced Turbine Ensures Exceptional Endurance.
- The Turbine Is The Only Dynamic Part In Contact With Water, Offering The Well-Known Durability Of The Product.
- No Need For Adjustment Due To Its Design And High Technology Implemented In Manufacturing.
Easy Reading
Flodis Register Combines The Follwing Advantages :
- Rotation Close To 360 Derajad On Site
- Large Numbered Rollers Wih Good Contrast For Excllent Reading Capability
- Wiper Ensures Readability Of The Extra-Dry Register In Tough Humid Conditions
- The Copper Can Register Version Assure Water Tightness In Permanent Immersion Condition.
Working Principle Of Flodis ITRON DN20:
Flodis Has Two Main Omponent; The Hydraulic That Allows Measurement Of The Water Flow And The Register That Displays The Easured Water Volume. Transmission Interface Between Those Components Is Achieved By A Magnetic Coupling
- Flodis Is A Single Jet Velocity Meter. Flow Coming From The Inlet, Diverted By A Specially Shaped Injector.
- Drives The Turbine
- This Technology Is Suitable For All Types Of Distributions Water Quality. Equipped With An Upstream Filter
- Flodis Is Protected Against Impurities Accidentally Conveyed By Water.
The Magnetic Coupling Transmission, Standard On The Flodis Line, Is Accompanied An Extra -Dry Register.
Both Gears And Register Are In Waterproof And Air Proof Enclosure.
The Turbine Is The Only Moving Part Of The Meter In Motion In Water.
Communication :
Flodis Is Supplied Pre-Equipped With Cyble Target Allows Communication And Remote Reading Through :
- Pulse Output (Cyble Sensor)
- M-Bus Protocol (Cyble M-Bus)
- Radio Frequency Wireless Link For Mobile And Fixed Network (AnyQuest And EverBlu)
Key Advantages Of Cyble Technology
- No Need For Additional Investmet Of The Meter To Implement Remote Reading
- Itron Standarized Meter Interface, Irrespective Of Meter Technology And Widely Spread On Itron Water Meters Range
- Leakage Detection
- Reverse Flow Management
- Consumption Profile Analysis
- Immune To Magnetic Tampering
- Principle Proven On The With A 20 Years Experience
Technical Characteristics :
- Nominal Diameter (DN) : 20 Mm (3/4 Inches)
- Nominal Flow Rate (Q3) : 4 M3/H
- Standard Ratio Horizontal (Q3/Q1) : 160
- Minimum Flow Rate (Q1) : 25 L/H
- Transitional Flow Rate (Q2) : 40 L/H
- Overload Flow Rate (Q4) : 5 M3/H
- Pressure Loss Class At Q3 : 0.63 Bar
- Maximum Admissible Pressure (MAP) : 16 Bar
- Operating Temperature (T) : 0,1/50 Derajad Celcius