PT. SRIAYU MULTI KREASI

Address : Jln. Hayam Wuruk

Gedung Harco Glodok Lantai 5 Blok A No. 42

Jakarta Barat

Pressure Gauge WIKA Model 611.10


DESCRIPTION

The model 611.10 and 631.10 capsule pressure gauges are based upon the proven capsule measuring system. The capsule measuring principle is particularly suitable for low pressures. On pressurisation, the expansion of yhe capsule element, proportional to the incident pressure, is transmitted to the movement and indicated.

The case is made from black lacquered steel with a snapfitted window. The material of the process connection is a copper alloy with model 611.10 and stainless steel with model 632.10

The modular design enables a multitude of combinations of case materials, process connections, nominal sizes and scale ranges. Due to this varience, the instrument is suitable for use in a wide range of applications within industry.

For mounting in control panels, the capsule pressure gauges can, depending on the process connection, be fitted with a surface mounting flange or with a triangular bezel and mounting bracket.

APPLICATION

  • Pressure gauge for use in a protected environment
  • Medical, vacuum, environmental, laboratory techno;ogy, for contents measurement and filter monitoring
  • For gaseous, dry and non-aggressive media
  • Model 631.10 also for aggressive media

SPECIAL FEATURES

  • Zero point setting in front
  • Special connection location on request
  • Low scale ranges from 0…25 mbar

SPECIFICATION

Design

EN 837-3

Nominal size in mm

50, 63

Accuracy class

1.6

Scale ranges

NS 50: 0 … 60 mbar to 0 … 600 mbar

NS 63: 0 … 25 mbar to 0 … 600 mbar

or all other equivalent vacuum or combined pressure and vacuum ranges

Pressure limitation

Steady: Full scale value

Fluctuating: 0.9 x full scale value

Permissible temperature

Ambient: -20 … +60 °C

Medium: ≤ 100 °C

Temperature effect

When the temperature of the measuring system deviates from the reference

temperature (+20 °C): max. ±0.6 %/10 K of full scale value

Ingress protection per IEC/EN 60529

IP32

Process connection

Model 611.10: Copper alloy

Model 631.10: Stainless steel

Lower mount or back mount

(NS 50: Only back mount)

G ¼ B (male), SW 14

Pressure element

Model 611.10: Copper alloy

Model 631.10: Stainless steel

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

Categories

error: Content is protected !!